NioCorp Drilling Continues to Return High-Grade Niobium Assays

Vancouver, British Columbia – September 10, 2014 – NioCorp Developments Ltd. (“NioCorp” or the “Company“) (TSX-V: NB, OTCQX: NIOBF, FSE: BR3) is pleased to announce receipt of additional assays from the ongoing drilling and advancement operations at Elk Creek, Nebraska.


Drillholes NEC14-011 and NEC14-012, two of six drillholes comprising the Phase II drilling program at the project site, have been completed. These drillholes define a north-west to south-east drill section through defined resource, and the holes are oriented at right angles to the 5 holes drilled during the Phase I drilling program. The results are supporting niobium mineralization around the outer edges of the defined Resource.


The collected core samples have been systematically processed and shipped for certified analytical assaying and physical rock property test work at Actlabs in Ancaster, Ontario to support NioCorp’s corporate objectives for the project.


Analytical highlights for the top 344 meters of NEC14-011 and top 555 meters of NEC14-012 appear below. Note that due to the angle of the drilling and other factors, these do not represent the true thickness of the Niobium Resource:


NEC14-011 Initial Results

  • 101 m interval between 223 – 324 m (open) at 1.00% Nb2O5


NEC14-012 Initial Results

  • 208.8 m interval between 251 – 459.80 m (open) at 0.95% Nb2O5, including
    • 84 m (251 – 335 m) at 1.00 % Nb2O5
    • 56 m (352 – 408 m) at 0.95 % Nb2O5
    • 46 m (414 – 460 m) at 1.15 % Nb2O5
    • 79 m (476 – 555 m) at 0.52 % Nb2O5

At the same time, the company is pleased to announce the addition of a metallurgical drilling component to the Phase II program. Metallurgical drilling will provide quantities of PQ and HQ drill core to support the needs of the company’s ongoing metallurgical development program. The collection of drill core from the carbonatite in the first metallurgical hole began on September 8, and 90 meters of PQ core has been collected to date. This material will support additional hydromet and initial flotation pilot plant testing.


“Yet again, our drilling program at Elk Creek continues to deliver impressive Niobium assays” said Mark Smith, CEO of Niocorp. “In previous releases, we have been able to announce intervals with the highest grade results to date, some in excess of 3% and 4% grade material. These latest results show the extensive continuity of material in excess of 1% grade, furthering our commitment to confirming this deposit as truly world class in grade and size. It is important to note that the focus of this drilling campaign has been targeted infill drilling for resource classification, in addition to geotechnical, hydrogeological and metallurgical purposes. The deposit remains open to the southeast, northwest and at depth. In the future, we intend to do additional drilling to expand on the known orebody, in particular at depth, where the highest grades to date have been recorded.”


Quality Control: Samples for NEC14-011 and NEC14-012 were continuously collected from the carbonatite’s upper contact at the base of the overlying limestone to the end of the drillholes, 190 to 843 m and 222 to 900 m, respectively. Samples were submitted to Activation Laboratories Ltd. (ActLabs) of Ancaster, Ontario. HQ diameter core was split into half-core samples and approximately 25% of the submitted core samples consist of quality control and quality assurance samples. Both NEC14-011 and NEC14-012 ended in carbonatite and remain open at depth.


Qualified Persons: Brad Ulry, B.Sc., P.Geo., Dahrouge Geological Consulting Ltd., a Qualified Person as defined by National Instrument 43-101, is responsible for the Elk Creek drilling operations and has read and approved the technical information contained  in this news release.


About the Company: NioCorp are developing the only primary niobium deposit known to be under development in the U.S., and the highest grade undeveloped niobium deposit in North America, located near Elk Creek, Nebraska. The Company has published an NI 43-101 resource of 19.3 Million tonnes grading 0.67% Indicated, containing over 129,182 tonnes of Nb2O5, and 83.3 Mt grading 0.63% Inferred, containing over 523,844 tonnes of Nb2O5). Niobium is mainly used in the form of Ferro-Niobium to produce HSLA (High Strength, Low Alloy) steel, to produce lighter, stronger steel for use in automotive, structural and pipeline industries. The U.S. imports 100% of its niobium needs.


For further information, contact the Company at (604) 568-7365 or at




Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.


About author

This article was written by The Wall Street Analyzer

The Wall Street Analyzer's staff of writers, analysts, publishers, producers, market researchers, and PR professionals aim to provide investors with the tools they need to make informed decisions on buying stock. Our staff is a mix of financial professionals and media savvy individuals whose experiences bring the best talent from both ends of the spectrum. On one hand our financial experience gives us the ability to identify promising, off the grid companies before they are uncovered by the rest of the market, and on the other hand our media experience allows us to produce interviews which appeal to a large audience because we provide a format in which more investors can understand a featured companies' upside. Our philosophy is to turn stock tickers into stories, ideas into headlines, and technical and financial data into easy to understand tidbits, easier to digest and therefore consumed by a larger audience. These interviews provide a jumping off point for investors to do further research into a prospective company. Our editorials seek to provide an out-of-the-box perspective found in few other financial sites.